Water-based synthetic underlay, single-component with granular inert fillers. It creates an elastic, shock-absorbing layer for multi-purpose sports fields.

It is used as an intermediate layer in sports systems, on compatible asphalt or concrete substrates, indoors and outdoors. It pairs with the finishes provided by the system.

• Consumption: 1.5 kg/m² in two coats.
• Bucket of 20 kg.
• Indicative drying time: 4 hours at 23 °C and 50% R.H.

Consumption and times vary with the substrate and environmental conditions. Consult the technical data sheet for the full cycle.

Liquid synthetic underlay with water-based resins and granular aggregates. It forms an elastic surface capable of cushioning impacts in multi-purpose fields.

Suitable for indoor and outdoor fields, as an underlay of compatible sports systems. It is spread with a notched trowel and completed with the finish of the cycle.

• Consumption: 0.8 L/m² per mm, with a minimum thickness of 2 mm.
• Bucket of 25 L.
• Indicative drying time: 4 hours at 23 °C and 50% R.H.

Consumption and times vary with the substrate and environmental conditions. Consult the technical data sheet for the full cycle.

Multi-use walkable coating with water-based resins. It creates a continuous, non-slip surface, resistant to wear and weathering.

Usable on compatible waterproofing systems, multi-purpose fields, cycle paths and pedestrian areas. It is suitable for concrete or bituminous substrates prepared according to the cycle.

• Consumption: 1,2 kg/m².
• Bucket of 20 kg.
• The technical data sheet indicates 4 hours of drying and walkability after 12 hours, at 23 °C and 50% R.H.

Consumption and times vary with the substrate and environmental conditions. Consult the technical data sheet for the full cycle.

Coloured acrylic water-based finish, formulated to resist mechanical wear and weathering. It allows defining the playing areas in Sport Flooring systems.

It is used indoors and outdoors for demarcations and compatible sports coatings. Application with a roller or brush.

• Consumption: 1 kg/m², or 0.05 kg per metre of 50 mm wide line.
• Bucket of 5 kg.
• Drying: about 4 hours at 23 °C and 50% R.H.

Consumption and times vary with the substrate and environmental conditions. Consult the technical data sheet for the full cycle.

Single-component low-thickness drive-on coating. It protects internal and external surfaces subject to traffic and wear, with resistance to weathering and UV rays.

Suitable for garages, car parks, yards and concrete floors. It can complete compatible waterproofing systems.

• Consumption: 1 kg/m² in two coats.
• Bucket of 20 kg.
• At 23 °C and 50% R.H.: drying 4 hours, walkability 12 hours, driveability after 4 days.

Consumption and times vary with the substrate and environmental conditions. Consult the technical data sheet for the full cycle.

Two-component water-based epoxy filler, specifically for levelling and repairing industrial floors and cementitious surfaces. Thanks to its high filling capacity, it allows targeted and effective interventions even at high thicknesses, restoring the flatness and continuity of the substrate.

It is applied with a trowel to seal and level cracks, fissures and cavities in the substrate. The two components, supplied in pre-dosed amounts, must be mixed carefully following the proportions and instructions given in the technical data sheet.

• Kit of 5 kg.
• Consumption depending on the repair.
• Workability time: about 1 hour.
• Drying: about 24 hours at 20 °C and 40% R.H.

Yield, actual consumption and curing times depend on the substrate and the microclimatic conditions at the time of laying. To ensure the intervention is carried out correctly, please refer to the technical data sheet of the full system.

Coloured two-component epoxy paint formulated to create continuous, joint-free coatings. It provides high mechanical and chemical resistance, offering a perfectly washable, hygienic surface ideal for protecting floors and surfaces in internal industrial environments.

Ideal for application on floors and walls, even in high mechanical stress environments subject to forklift traffic. It is easily applied with a roller or brush on substrates properly prepared according to the application system specifications.

• Consumption: 0.30 kg/m² in two coats.
• Kit A+B of 5.75 kg.
• At 23 °C and 50% R.H.: drying 24 hours, driveability after 7 days.

The volumes used and the drying times are strictly linked to the nature of the surface and the environmental parameters. For detailed instructions on the application system, please refer to the technical data sheet.

High-tech white water-based protective coating with ultra-reflective and photocatalytic properties. It reduces heat build-up and surface temperature, helping to mitigate the urban heat island effect, while the photocatalytic action promotes the decomposition of dirt, ensuring a constant self-cleaning effect over time.

Suitable for the protection and thermal regulation of roofs and horizontal, vertical or sloped surfaces, including compatible bituminous membranes. It is applied with a brush, roller or airless system, strictly following the instructions given in the technical data sheet.

• Consumption: 1 kg/m² in two coats.
• Buckets of 5 and 20 kg.
• Drying: about 5 hours at 23 °C and 50% R.H.

The absorbency of the surface and the environmental factors on site may vary actual consumption and drying times. For correct application and to consult the full system, please refer to the technical data sheet.