Polites 140 is an alkali-resistant fibreglass mesh for reinforcing internal and external plasters. It prevents cracks and fissures by distributing stresses on weak substrates or substrates subject to settlement.

Polites 140 reinforces Diathonite plasters and improves the continuity between materials of different nature. It is embedded in the coating, overlapping the sheets by at least 10–15 cm at the joints.

• Indicative consumption: 1.10 m² of mesh per m².
• Roll of 1 × 50 m.
• Declared weight: 120 g/m² ±5%.
• Mesh size: 11 × 11 mm.
• No drying time required.

For application instructions and full data, please refer to the technical data sheet.

Polites 80 is a fibreglass mesh that reinforces levelling coats and liquid waterproofings, preventing micro-cracks and cracks. It effectively absorbs and distributes the stresses caused by the shrinkage of the coating, ensuring high surface stability.

Alkali-resistant and specifically designed to reinforce reinforced levelling coats and compatible waterproofing layers. Easy and quick to lay, it prevents crazing and micro-cracking, ensuring high stability and optimal distribution of stresses.

• Indicative consumption: 1.10 m²/m².
• Roll of 1 × 50 m.
• Weight: 80 g/m².
• Mesh size: 4.0 × 4.2 mm.
• No drying time required.
• For the continuity of the reinforcement, the sheets must overlap along the joints by at least 10–15 cm.

For application instructions and full data, please refer to the technical data sheet.

High-strength AR fibreglass reinforcing mesh for consolidating and securing the soffit of floors in anti-debonding systems. With an enriched matrix for alkali protection, it combines structural lightness with bidirectional mechanical performance, ensuring load distribution and preventing the risk of falling elements.

It is applied to the soffit of hollow-core concrete or steel floors using the specific components and fixing plugs provided by the system. Ideal with Diathonite Thermactive.037 and Diathonite Acoustix plasters, the mesh sheets must overlap by at least 10 cm along the laps to ensure the structural continuity of the reinforcement.

• Indicative consumption: 1.1 m²/m².
• Roll of 1 × 50 m.
• Mesh size: 25 × 25 mm.
• Colour: red.
• No drying time required.

For application instructions and full data, please refer to the technical data sheet.

High-performance AR fibreglass reinforcing mesh, designed for structural reinforcement interventions with CRM (Composite Reinforced Mortar) systems. Thanks to its high alkali resistance and stress distribution capacity, it increases the mechanical strength, ductility and energy dissipation capacity of existing masonry.

Developed for the consolidation and seismic upgrade of existing masonry, it ensures excellent adhesion to the inorganic matrix and effective stress distribution, increasing the ductility and load-bearing capacity of the masonry wall without adding excessive structural loads.

• Declared consumption: 1 m²/m².
• Roll of 1 × 50 m; red.
• Mesh strength class: G38/600.
• No drying time required.

For application instructions and full data, please refer to the technical data sheet.

High-hold mechanical fixing kit, made of a shaped galvanised steel washer and a specific self-tapping screw. Developed for the precision anchoring of the Polites AR250 mesh on steel joists and metal substrates in anti-debonding systems, it ensures a rigid lock and an even distribution of tensile loads.

Designed for anchoring on steel joists. To ensure the maximum hold of the mechanical fixing, it must be laid on a dry, clean substrate, in strict compliance with the system and technical data sheet specifications.

• Indicated quantity: no less than 4 fixings per m².
• Kit with 100 washers and 100 screws.
• Washer: 70 mm diameter, 9 mm hole.
• No drying time required.

For application instructions and full data, please refer to the technical data sheet.

High-hold mechanical fixing made of a nylon flange and a galvanised steel self-tapping screw, designed for anchoring the Polites AR250 mesh on hollow-core concrete floors in anti-debonding systems.

The flange offers an improved bonding surface and makes the subsequent skimming easier. To ensure the maximum mechanical hold of the anchoring, the substrate must be carefully prepared, cleaned and kept free of moisture throughout all the laying stages.

• Indicated quantity: no less than 4 fixings per m².
• Kit with 100 nylon flanges and 100 screws.
• Screw: 7.5 mm diameter, 100 mm length.
• No drying time required.

For application instructions and full data, please refer to the technical data sheet.

Polites Support is a galvanised steel angle profile for the connection and continuity of the reinforcement between the Polites AR250 mesh on the ceiling and the vertical perimeter walls.

A component of anti-debonding systems, it ensures the distribution of stresses at critical junction points and the perimeter anchoring of the system.

• At least one angle every 50 cm, with two plugs.
• Kit: 100 angles and 200 fixing plugs.
• Angle dimensions: 120 × 35 mm.
• No drying time required.

For application instructions and full data, please refer to the technical data sheet.

High-performance two-component epoxy resin for high-bond chemical anchors in CRM structural reinforcement systems. Formulated for the structural fixing of fibreglass connectors, it ensures the transfer of loads between the reinforcement and the masonry substrate, guaranteeing reliability and mechanical strength even in high-seismicity areas.

Ideal on concrete, tuff, masonry and natural stone, it ensures adhesion even on damp substrates. Installation takes place by direct injection through a static mixer, ensuring an even dosing of the components and a smooth filling.

• Two components, with a 10:1 resin/hardener ratio.
• Box with 12 cartridges of 420 mL and 12 mixers.
• Colour: grey; styrene-free formulation.
• Yield and curing depend on the hole and the temperature: see the technical data sheet.

For application instructions and full data, please refer to the technical data sheet.

Elites L is a preformed fibreglass and resin connector for CRM structural reinforcement. The improved bonding favours the connection with the masonry and the reinforcement system.

It is used in interventions on masonry, arches and vaults, also for seismic upgrading. Anchoring instructions and pairing with the system components are described in the technical data sheet.

• Material: fibreglass with resin (GFRP).
• Colour: white.
• Declared resistant area: 11.5 mm².
• Average tensile strength: 18,900 N.

For application instructions and full data, see the technical data sheet in the Download section.

Elites F1 is a transverse AR fibreglass connector with a rigid central part and a frayed end. It connects the masonry to the CRM structural reinforcement.

Intended for the reinforcement of masonry, arches and vaults, also in seismic-upgrading interventions. It is compatible with lime- or cement-based mortars and with the matrices used for grouting.

• Single rosette with a frayable end.
• Colour: white.
• Minimally invasive application.

Laying instructions and full characteristics in the technical data sheet.

For application instructions and full data, see the technical data sheet in the Download section.

Elites F2 is a double-rosette transverse AR fibreglass connector: it has a rigid central section and two frayed ends. It connects the reinforcements on both sides of the masonry.

It is used in the CRM reinforcement of masonry, arches and vaults, also for seismic upgrading. The technical data sheet pairs it with Polites AR330, Sismabond and Diathonite Sismactive.

• Double rosette with two frayed ends.
• Colour: white.
• For interventions on both sides of the masonry.
• Compatible with lime- or cement-based mortars.

For application instructions and full data, see the technical data sheet in the Download section.

Diafon is an underlay mat for impact sound insulation. The polypropylene non-woven fabric, protected by a polyethylene film, separates the floor layers and interrupts the transmission of vibrations.

Suitable for floating floors and screeds, in new builds and renovations. It is placed between the finish layer of the systems and the laying screed of the flooring.

• Roll of 1 × 25 m, equal to 25 m².
• Thickness: 3.0 mm; weight: 300 g/m².
• Colour: light grey.

Data updated to the attached technical data sheet ST070IT25222910.

For application instructions and full data, see the technical data sheet in the Download section.

Elastic non-woven band for the waterproofing treatment of joints between horizontal and vertical surfaces and of critical points. It increases the resistance of liquid waterproofing at critical points.

It is used together with single- and two-component water-based liquid waterproofings (such as Acriflex Fybro, Acriflex Rapido, Acriflex Pro, Acriflex X-Pro) to reinforce them and increase their mechanical resistance. Highly elastic even at low temperatures, it reduces application times and allows the continuity of the waterproofing.

• Yield: 1.00 m/m, with an overlap of at least 2 cm.
• Roll of 10 × 0.15 m; each box contains 4 rolls.
• No drying required.
• Density: 52 g/cm².
• Elongation: 85%.
• Breaking load > 20.0 N/cm.
• Solvent-free product.

Needle-punched and heat-calendered polypropylene fibre non-woven geotextile, easy to apply. UV-resistant, it improves the tensile and puncture resistance of liquid waterproofing systems.

It has high stability, is non-toxic and can be used in combination with many products, compatible with Diasen liquid waterproofing systems. It keeps its characteristics over time and has high mechanical resistances.

• Yield: 1.00 m²/m², with an overlap of at least 3 cm.
• Roll of 50 × 1 m.
• No drying needed.
• Thickness: 0,55 ± 10% mm.
• Weight: 80 ± 10% g/m².
• Elongation: 50% ± 15%.
• Wide-width tensile strength: 4,00 kN/m.
• Static puncture resistance: 750 N; dynamic: 43.00 mm.
• Normal permeability in the plane: 0,090 m/s.

Self-adhesive sealing tape made of a butyl rubber-based compound spread on a hydrophilic polypropylene strip. Suitable for sealing the joints between horizontal and vertical surfaces (floor – wall).

It is used whenever an effective adhesion on concrete is needed and, on the other side, a finished, rough and absorbent surface. Highly elastic, with total adhesion to the concrete substrate, extreme handling, plasticity and deformability and great heat stability.

• Yield: 1.00 m/m, with an overlap of at least 1 cm.
• Roll of 15 × 0.075 m; 1 box = 8 rolls, pallet of 36 boxes.
• No drying required.
• Adhesion to the concrete substrate: 0.9 N/m².
• 90° peel strength ≥ 90 N.
• Tensile strength (longitudinal and transverse) > 100 N/50 mm.
• Elongation at break > 70%.
• Puncture resistance ≥ 80 N.
• Solvent free.