Acriflex Rapido
Description
- The product
Single-component liquid waterproofing with water-based elastomeric resins. The fast film formation allows it to resist surface wash-off after about 20 minutes.
- Where and how to use it
Suitable for terraces, balconies, roofs, gutters, foundations and concrete artefacts, even with low temperatures and high humidity within the limits of the technical cycle.
- General information
- Waterproofing consumption: 2 kg/m² in two coats.
- Bucket of 20 kg.
- Complete drying: about 4 hours at 23 °C and 50% R.H.; distinct from film formation.
Ultragum
Description
- The product
Water-based ready-to-use liquid bituminous membrane. It creates an elastic, continuous, joint-free waterproofing, even on complex geometries.
- Where and how to use it
Suitable for smooth or slate-profiled bituminous membranes and other compatible substrates, with the specified primer. It can be left exposed and resists standing water.
- General information
- Consumption: 2 kg/m² in two coats.
- Buckets of 5 and 20 kg.
- Film formation: about 30 minutes.
- Complete drying: about 4 hours at 23 °C and 50% R.H.
Ultrabit
Description
- The product
Bituminous paste waterproofing, water-based and with recycled rubber. It combines water protection with the ability to fill the irregularities of the substrate.
- Where and how to use it
Suitable for irregular concrete surfaces, terraces, balconies, foundations and planters. It is applied cold, without reinforcing mesh, according to the planned system.
- General information
- Consumption: 2 L/m² for about 2.5 mm.
- Bucket of 20 L.
- Film formation: about 30 minutes.
- Drying: about 4 hours at 23 °C and 50% R.H.
Thermikoat Cool Roof
Description
- The product
Ultra-reflective single-component water-based waterproofing, with elastomeric resins and nanotechnology inert fillers. It combines resistance to standing water and cold flexibility with the reflection of solar radiation.
- Where and how to use it
Suitable for flat or sloped roofs and compatible substrates in concrete, wood, metal or bituminous membranes.
- General information
- Total consumption: 2 kg/m².
- Bucket of 20 kg.
- Complete drying: 5–7 hours at 23 °C and 50% R.H.
- Walkability limited to periodic maintenance.
Acriflex X-Pro
Description
- The product
Single-component water-based waterproofing, fibre-reinforced and walkable. It creates an elastic protection resistant to standing water, UV rays and weathering.
- Where and how to use it
Suitable for concrete roofs, terraces, balconies and foundations. With specific primers it is also applied on membranes, existing floors, wood or metal. It can be left exposed or tiled.
- General information
- Consumption: 2 kg/m² in two coats.
- Buckets of 5 and 20 kg.
- Complete drying: about 4 hours at 23 °C and 50% R.H.
Acriflex Pro
Description
- The product
Single-component acrylic waterproofing with elastomeric resins and nanotechnology fillers. It keeps flexibility at low temperatures and resists external exposure.
- Where and how to use it
Suitable for roofs, terraces, balconies and compatible artefacts. It can be left exposed; walkability is limited to ordinary maintenance. Application with airless, roller, brush or trowel.
- General information
- Waterproofing consumption: 2 kg/m² in two coats.
- Bucket of 20 kg.
- Drying: about 4 hours at 23 °C and 50% R.H.
Acriflex Fybro
Description
- The product
Two-component acrylic-cementitious waterproofing with polypropylene fibres. It forms a continuous and elastic layer without requiring the traditional reinforcing mesh in the planned applications.
- Where and how to use it
Suitable for large roofs, terraces, tanks and foundations. It must be coated: it can receive tiles or compatible finishes. Application with airless, roller or trowel according to the data sheet.
- General information
- Consumption: 2 kg/m² per 2 mm.
- Pre-dosed kit A+B of 25 kg.
- Drying: about 4 hours at 23 °C and 50% R.H.
O.R.A. Antipioggia
Description
- The product
Transparent waterproofing for balconies, terraces and tiled surfaces in general. Solvent-based product easily applicable also by DIY users with a roller or brush. It does not alter the appearance of the floor.
- Where and how to use it
A transparent liquid waterproofing solution, it blocks water infiltration on already paved terraces or balconies, without removing the existing tiles. Easily applicable with roller or brush, it does not alter the appearance of the surface. Applicable both in summer and winter on stone or terracotta surfaces.
- General information
- Yield: 0.20 L/m².
- Metal bucket of 5 L.
- Drying: 4 hours at 23 °C and 50% R.H.
- Application: airless, brush, roller.
- Single component.
- Accelerated ageing resistance: 1680 hours (> 10 years).
- Adhesion on tile: 3.5 N/mm² (excellent).
- Resistance to contact with hydrochloric acid (30% solution): unchanged after 12 hours.
Watstop
Description
- The product
Three-component epoxy-cementitious waterproofing, designed to resist water pressure also against back-pressure. It can act as a vapour barrier and as protection against humidity and salts.
- Where and how to use it
Suitable for basement rooms, cellars, garages, lift pits and retaining walls. It can be coated with plasters, skim coats, tiles or compatible finishes.
- General information
- Consumption: 2 kg/m² against back-pressure; 1 kg/m² as a vapour barrier with substrate humidity below 4%.
- Kit of 5 or 10 kg.
- Drying: about 24 hours at 23 °C and 50% R.H.
Acriflex PH4
Description
- The product
Two-component fibre-reinforced acrylic-cementitious waterproofing, formulated for high chemical resistance. It offers elasticity and protection in critical pH conditions.
- Where and how to use it
Suitable for tanks and basins with acidic or basic substances, within the compatibility limits of the technical data sheet. Application with airless, brush, roller or notched trowel.
- General information
- Total consumption: 2.5 kg/m² in two coats.
- Kit of 25 kg: A 13 kg and B 12 kg.
- Drying: about 4 hours at 20 °C and 40% R.H.
Diaseal Strong
Description
- The product
Single-component elastic and filling polyurethane sealant. It treats the points of discontinuity where a waterproof seal must be obtained.
- Where and how to use it
Suitable for expansion joints, penetrations, junctions between panels and other critical points. It is applied with a sealant gun or trowel on the prepared substrate.
- General information
Bentotelo
Description
- The product
Self-bonding and self-sealing bentonitic waterproofing geocomposite. The bentonite is held between the sheets and expands on contact with water.
- Where and how to use it
It is used in the pre-poured waterproofing of foundations, slabs and basement rooms, also below the water table level. Laying follows the bentonitic systems manual.
- General information
- Rolls of 1.15 × 5.10 m or 2.55 × 15 m.
- Geometric consumption: 1 m²/m², plus the planned overlaps.
- No drying required.
Diajoint
Description
- The product
Water-expanding bentonitic cord to seal construction joints in concrete. The expansion on contact with water contributes to the watertightness of the joint.
- Where and how to use it
It is laid in the horizontal and vertical construction joints of underground structures. It fills the small voids of the joint; arrangement and fixing follow the technical manual.
- General information
- Section: 20 × 25 mm.
- Rolls of 5 m, six per box.
- Consumption: 1 m/m, plus the overlaps.
- No drying required.
